# Roles, skills and groups

> **Set up with an AI agent:** Connect Chrona MCP for documentation, setup guidance and configuration recipes. Server: https://mcp.chrona365.com/mcp (Streamable HTTP; authentication: None). Your agent needs separately authorized Dataverse tools to apply changes. In Copilot Studio, after importing Chrona, add the Chrona Scheduler connector to your agent alongside Microsoft’s Dataverse tools. [Connection guide](https://chrona365.com/workforce/install-with-an-agent).

Set [roles](https://chrona365.com/glossary/role) for each shift, [skills](https://chrona365.com/glossary/skills) needed for those roles, and [groups](https://chrona365.com/glossary/group) such as wards or buildings. Each shift needs one role; workers can hold several.

## Set them up

1. Open **Schedulers**, open the scheduler and select the gear on its board. In **Roles and skills**, select **New role** or **New skill**, type its name and select **Save**. Select a role's or skill's name to open its form, for example to set its **Color**.
2. Under each role, in **Required skills**, pick the skills the role needs from the list. Each one shows as a tag; its **x** removes it. Select **Save** to keep the changes. The role's form has the same list.
3. Open **Workers**, then a worker. Under **Roles and skills**, pick their **Roles** and their **Skills** the same way.

Set each role's required **Standard hourly rate** under its name in **Roles and skills**. The currency appears beside it:

| Condition | Rate behavior |
| --- | --- |
| Scheduler has a site | Uses the site's currency. |
| Scheduler has no site | You choose; your organization's base currency starts selected. |
| Change currency | Save the rate as 0 first. |
| Shift at a site with another currency | Rate is excluded from cost; the board names the worker. |
| Contract has no **Hourly rate** | Shift cost uses the role's rate. |

These rates estimate **Wages** and Auto Schedule costs. Payroll uses its own rates.

Worker pickers offer roles and skills owned by or shared with their schedulers; a role's form uses its own scheduler's list. Add workers through **Workers** on the board. Share roles or skills in **Roles and skills** settings; sharing a role also shares its required skills. After removing a tag, **Undo** restores it briefly, including a skill's dates.

A skill can count for set days only, such as a license that runs out. On the worker's **Roles and skills** tab, select the skill's tag, set **Valid from** and **Valid until**, and select **Save**. Leave either one empty for no limit. The end can't be before the start. To renew a skill, change its dates.

A shift type lists the roles that may work it. Pick them in the **Roles** box of the shift type's card, on the **Shift types** page of the scheduler's settings. On a coverage row, pick one of those roles as its **Role**. When the shift type lists one role and the row names none, Generate uses that role. The shifts it makes take that role.

A shift type can also need skills of its own. In the card's **Skills** box, type the first letters of a skill, then select **Must** or **Should** on its row. Auto Schedule gives the shift only to workers with every Must skill, and prefers workers with a Should skill. The tag shows the need, for example *First aid – Must*, in the skill's color. To change a need, remove the tag and pick the skill again. The shifts Generate makes take the shift type's skills.

## On the board

- A role holds on a shift only when the worker has every skill it needs, valid for the whole shift.
- On the **Roster grid** layout, a note under a worker's name names a missing skill, a skill that has run out or starts later, or a skill that runs out within 30 days. Point to it to read it all.
- On the **Timeline** layout, each worker's row shows their roles in each role's color. A role with an outline has the same note.
- To color shifts by role, set **Color by** to **Role** in [Scheduler settings](https://chrona365.com/docs/workforce/scheduler-settings#display).
- To change a shift's role, open the shift and choose another **Role**.

## Moving a shift by hand

The scheduler's **Skill rule** sets what happens when you drop a shift on a worker who does not hold its role, or whose skills for that role are not valid on that shift:

| Setting | What happens |
| --- | --- |
| **Don't allow** | The board asks for a reason before it saves the move: see [Assign anyway](https://chrona365.com/docs/workforce/call-out#assign-anyway). |
| **Warn** | The move stays, with a warning. |
| **Off** | No check. |

Set it in the [scheduler's settings](https://chrona365.com/docs/workforce/scheduler-settings#rules), in **Rules**: open **Schedulers**, open the scheduler and select the gear on its board.

## In Auto Schedule

Auto Schedule gives a shift only to a worker who holds its role, with the role's skills valid for the whole shift. When no one fits, the shift stays open.

## Pairing

A role can say who works with its workers. In the scheduler's settings, under **Roles and skills**, open a role's **Advanced** section. In **Pairing**, select **Add role**, then pick a role and its choice:

| Choice | What Auto Schedule does |
| --- | --- |
| **Required** | Gives a worker in this role a shift only when a worker in the partner role works a shift that covers it in full. Otherwise the shift stays open. |
| **Preferred** | Puts them with a worker in the partner role when it can. |
| **Unpreferred** | Keeps them apart from workers in the partner role when it can. |
| **Prohibited** | Does not put them on a shift that a worker in the partner role covers in full. |

A role can pair with itself: *Trainee* + **Prohibited** *Trainee* keeps trainees apart; *RN* (registered nurse) + **Required** *RN* requires a second RN. A rule binds only its owning role. Each partner appears once; change its choice or remove it with **x**, then **Save**. If nobody else in the run holds the partner role, Auto Schedule omits that pairing and tells you.

On the board, **Required** and **Prohibited** follow the scheduler's [Deny rule](https://chrona365.com/docs/workforce/allow-and-deny#the-deny-rule-on-the-board). Checks cover assignments and drags that leave a worker without a full-shift Required partner or add a Prohibited partner. Moving a partner to another worker, time or the open row also checks workers left behind.

Messages name workers and roles; removing a partner also names the unpaired worker's shift day. A move kept with **Warn** marks the shift with the missing or prohibited partner. In Auto Schedule's report, **Required pairings** and **Prohibited pairings** are Must rules; **Preferred pairings** and **Unpreferred pairings** are Should rules.

In Chrona Workforce Mobile, a worker cannot take a shift that would put them with a worker in a Prohibited partner role who is already on: not as an open shift, a swap, cover, a shift from a template or a pick. The app says only that the shift is not theirs. A **Required** pairing does not stop a worker taking a shift: you or Auto Schedule add the partner.

## Groups

Each scheduler has its own list of groups, and a group can have subgroups. For example, a store has the groups Front and Back, and Front has the subgroups Tills and Deli.

1. Open **Schedulers**, open the scheduler and select the gear on its board. In **Groups**, select **Groups**. The scheduler's groups open as a list, each with its subgroups and how many workers are in it.
2. Select **Add group**, type its name and press Enter. To add a subgroup, open the group's **More actions** (...) and select **Add subgroup**. Each name is used once among a scheduler's groups, and once among a group's subgroups.
3. The board lists the groups, and each group's subgroups, in the order of this list. Use **Move up** and **Move down** in **More actions** to change it. **Rename** changes a name everywhere it shows.
4. **Delete** asks you to confirm, then removes a group that nothing uses. A group with subgroups stays, and the message says to delete its subgroups first. A group that workers, shifts, coverage rows, demand rows, staffing standards or demand driver values still use stays, and the message counts each use.
5. Select a group to see its workers, each marked **Home group** or **Other groups**. A group also counts the workers in its subgroups. Select **Add workers**, tick workers of the scheduler and choose **Add as** **Home group** or **Other groups**. Adding someone as **Home group** moves their home group here. **Remove** takes a worker out of the group; removed from their home group, they have no home group on this scheduler. Each change saves at once.
6. On the board, **Workers** sets the same thing per worker: their **Home group** (a group or one of its subgroups) and their **Other groups** from the scheduler's list. A worker has one Home group on each scheduler they work for, and keeps their groups on other schedulers.
7. On a coverage row or a demand row, pick the **Group** and **Subgroup** its shifts are for, or leave them empty for none.

On the **Roster grid**, workers appear by home group, then subgroup; shifts appear in their own group. Group bands show the name, worker count and open shifts needing cover; subgroup bands are lighter. Each group shows filled against needed shifts, including open work. Fold a band with its chevron to keep just the filled/needed row. The two buttons beside **Resource** expand or collapse all groups; the board remembers folds. Mobile shows a shift's group and subgroup under its role.

Auto Schedule gives a worker only shifts of their home group, of their other groups, or with no group. A subgroup you add alone allows only that subgroup's shifts. A worker with no group in the scheduler's list can work any of its shifts. It prefers to give a shift to workers whose home group it is in. When you move a shift by hand to someone outside its group, the board warns you. You can keep the move: the shift then shows **Outside <name>'s groups**, and the Must rules list **Outside their groups**.

---
Product: Workforce Scheduler
Language: English
Canonical: https://chrona365.com/docs/workforce/roles-and-skills
